the ipower gm5208 is a precision brushless gimbal motor engineered for large-scale multi-rotor platforms requiring high torque and smooth stabilization. designed to support dslr cameras (canon 5d mark ii/iii), red epic, and airborne lidar pods, the gm5208 delivers 1800-2500g of load torque with a hollow shaft design for clean cable routing. available in two winding configurations — gm5208-12 and gm5208-24 — to suit different gimbal controller requirements and stabilization applications. both variants feature a 2.5mm dupont connector, 610mm #24awg lead wire, and are rated for 3-5s operation at up to 40w maximum power.

key features

• high load torque – 1800-2500g for dslr and cinema camera stabilization
• hollow shaft design – od ø15mm for clean internal cable routing
• two winding options – gm5208-12 and gm5208-24 for different controller setups
• 3-5s compatible – flexible voltage range for various gimbal controllers
• max 40w power – efficient high-torque operation
• 610mm lead wire – #24awg with 2.5mm dupont connector
• precision tolerances – rotor runout ≤0.1mm
• wide temperature range – -20°c to 60°c operating range
• high voltage tested – dc500v 10ma @ 1sec
• clockwise rotation – standard axle extension direction

perfect for

• dslr camera gimbals (canon 5d mark ii/iii and similar)
• red epic and cinema camera stabilization
• airborne lidar pod motors
• uav payload turntables
• large-scale multi-rotor gimbal systems
• professional aerial cinematography rigs
• custom brushless gimbal builds

variant options

• gm5208-12 – 12-turn winding, ø63mm diameter, 22.7mm height, 195g, 15.2ω internal resistance, 456-504 rpm no-load
• gm5208-24 – 24-turn winding, ø59.5mm diameter, 31.2mm height, 204g, 13.7ω internal resistance, 396-436 rpm no-load

technical specifications

gm5208-12

• model: gm5208-12
• outer diameter: ø63 ±0.05mm
• motor height: 22.7 ±0.2mm
• hollow shaft od: ø15 -0.008/-0.012mm
• hollow shaft id: ø12 +0.05/0mm
• internal resistance: 15.2ω ±5%
• no-load rpm: 456-504 rpm (at 20v)
• no-load current: 0.09 ±0.1a (at 20v)
• load current: 1a (at 20v)
• load torque: 1800-2500g
• motor weight: 195 ±0.5g

gm5208-24

• model: gm5208-24
• outer diameter: ø59.5 ±0.05mm
• motor height: 31.2 ±0.2mm
• hollow shaft od: ø15 -0.008/-0.012mm
• hollow shaft id: ø12.6 +0.05/0mm
• internal resistance: 13.7ω ±5%
• no-load rpm: 396-436 rpm (at 20v)
• no-load current: 0.09 ±0.1a (at 20v)
• load current: 1a (at 20v)
• load torque: 1800-2500g
• motor weight: 204 ±0.5g

common specifications (both variants)

• wire length: 610 ±3mm
• cable awg: #24
• wire connector: 2.5mm dupont
• maximum power: ≤40w
• working voltage: 3-5s lipo
• working temperature: -20°c to 60°c, 10-90% rh
• rotor housing runout: ≤0.1mm
• rotation direction: clockwise (axle extension)
• high voltage test: dc500v 10ma @ 1sec
• high temp test: 60°c for 100 hours (normal operation after 24h at room temp)
• low temp test: -20°c for 100 hours (normal operation after 24h at room temp)

what’s included

• 1x gm5208 brushless gimbal motor (gm5208-12 or gm5208-24 per selection)

important notes

• ipower gm5208 brushless gimbal motor — available in 12-turn and 24-turn windings
• designed for dslr, red epic, and airborne lidar gimbal applications
• hollow shaft for internal cable routing
• gimbal controller not included
• camera and payload not included

the ipower gm5208 is a precision brushless gimbal motor engineered for large-scale multi-rotor platforms requiring high torque and smooth stabilization. designed to support dslr cameras (canon 5d mark ii/iii), red epic, and airborne lidar pods, the gm5208 delivers 1800-2500g of load torque with a hollow shaft design for clean cable routing. available in two winding configurations — gm5208-12 and gm5208-24 — to suit different gimbal controller requirements and stabilization applications. both variants feature a 2.5mm dupont connector, 610mm #24awg lead wire, and are rated for 3-5s operation at up to 40w maximum power.

key features

• high load torque – 1800-2500g for dslr and cinema camera stabilization
• hollow shaft design – od ø15mm for clean internal cable routing
• two winding options – gm5208-12 and gm5208-24 for different controller setups
• 3-5s compatible – flexible voltage range for various gimbal controllers
• max 40w power – efficient high-torque operation
• 610mm lead wire – #24awg with 2.5mm dupont connector
• precision tolerances – rotor runout ≤0.1mm
• wide temperature range – -20°c to 60°c operating range
• high voltage tested – dc500v 10ma @ 1sec
• clockwise rotation – standard axle extension direction

perfect for

• dslr camera gimbals (canon 5d mark ii/iii and similar)
• red epic and cinema camera stabilization
• airborne lidar pod motors
• uav payload turntables
• large-scale multi-rotor gimbal systems
• professional aerial cinematography rigs
• custom brushless gimbal builds

variant options

• gm5208-12 – 12-turn winding, ø63mm diameter, 22.7mm height, 195g, 15.2ω internal resistance, 456-504 rpm no-load
• gm5208-24 – 24-turn winding, ø59.5mm diameter, 31.2mm height, 204g, 13.7ω internal resistance, 396-436 rpm no-load

technical specifications

gm5208-12

• model: gm5208-12
• outer diameter: ø63 ±0.05mm
• motor height: 22.7 ±0.2mm
• hollow shaft od: ø15 -0.008/-0.012mm
• hollow shaft id: ø12 +0.05/0mm
• internal resistance: 15.2ω ±5%
• no-load rpm: 456-504 rpm (at 20v)
• no-load current: 0.09 ±0.1a (at 20v)
• load current: 1a (at 20v)
• load torque: 1800-2500g
• motor weight: 195 ±0.5g

gm5208-24

• model: gm5208-24
• outer diameter: ø59.5 ±0.05mm
• motor height: 31.2 ±0.2mm
• hollow shaft od: ø15 -0.008/-0.012mm
• hollow shaft id: ø12.6 +0.05/0mm
• internal resistance: 13.7ω ±5%
• no-load rpm: 396-436 rpm (at 20v)
• no-load current: 0.09 ±0.1a (at 20v)
• load current: 1a (at 20v)
• load torque: 1800-2500g
• motor weight: 204 ±0.5g

common specifications (both variants)

• wire length: 610 ±3mm
• cable awg: #24
• wire connector: 2.5mm dupont
• maximum power: ≤40w
• working voltage: 3-5s lipo
• working temperature: -20°c to 60°c, 10-90% rh
• rotor housing runout: ≤0.1mm
• rotation direction: clockwise (axle extension)
• high voltage test: dc500v 10ma @ 1sec
• high temp test: 60°c for 100 hours (normal operation after 24h at room temp)
• low temp test: -20°c for 100 hours (normal operation after 24h at room temp)

what’s included

• 1x gm5208 brushless gimbal motor (gm5208-12 or gm5208-24 per selection)

important notes

• ipower gm5208 brushless gimbal motor — available in 12-turn and 24-turn windings
• designed for dslr, red epic, and airborne lidar gimbal applications
• hollow shaft for internal cable routing
• gimbal controller not included
• camera and payload not included

Nome del marchio : xdrc

materiale : materiale composito

Età consigliata : 14+ anni

Componenti e accessori per modellismo radiocomandato : motori

per tipo di veicolo : aeroplani

Utilizzo : veicoli e giocattoli telecomandati

certificazione : ce

Periferiche/dispositivi di controllo remoto : motore

forniture di utensili : classe assemblata

parametri tecnici : valore 4

numero di modello : x3520 x3530

attributi della trazione integrale : assemblaggio

Nome del marchio : qx-motor

è elettrico : senza batteria

materiale : materiale composito

Età consigliata : 14+ anni

Parti e accessori per modellismo radiocomandato : ricevitori

per tipo di veicolo : aeroplani

Utilizzo : veicoli e giocattoli telecomandati

certificazione : ce

Componenti/accessori per l’aggiornamento : batteria al litio

Periferiche/dispositivi di controllo remoto : telecomando

accessori per utensili : batteria

quantità : 1 pezzo

parametri tecnici : valore 2

attributi della trazione integrale : motori

quantità : 1 pezzo

dimensioni : 64 mm

parametri tecnici : valore 2

numero modello : 64mm edf

per tipo di veicolo : aeroplani

accessori per utensili : batteria

attributi della trazione integrale : motori

Periferiche/dispositivi di controllo remoto : telecomando

Componenti/accessori per l’aggiornamento : batteria al litio

Parti e accessori per modellismo radiocomandato : ricevitori

materiale : materiale composito

Età consigliata : 14+ anni

Utilizzo : veicoli e giocattoli telecomandati

numero di serie : qx-motor

attributo 1 : 3500kv 3800kv 2200kv 2400kv

attributo 2 : usa 60a 80a esc

attributo 3 : per aereo radiocomandato ad ala libera fms

premium brushless motor from t-motor designed for heavy-lift drones, long-range builds, and professional applications. available in three kv ratings to match your specific performance needs.

choose your kv rating

• kv170 – maximum efficiency for 12s builds, ideal for ultra-long-range cruising
• kv340 – balanced performance for 6-8s setups, versatile all-rounder
• kv400 – higher rpm for 6s builds, responsive and powerful

key features

• 4.2kg max thrust – powerful performance for heavy payloads
• 6-12s lipo compatible – flexible voltage range for various applications
• premium construction – high-quality materials for durability and reliability
• efficient design – optimized for long flight times and cool operation
• t-motor quality – industry-leading performance and consistency

technical specifications

• model: mn5008
• kv options: 170 / 340 / 400
• max thrust: 4.2kg
• voltage range: 6s-12s lipo
• material: high-grade metal construction
• shaft: standard motor shaft
• mounting: standard bolt pattern

perfect for

• long-range fpv builds (7-10 inch props)
• heavy-lift camera drones
• professional cinematography platforms
• mapping and surveying drones
• agricultural spray drones
• custom builds requiring high thrust

what’s included

• 1x t-motor mn5008 brushless motor
• mounting hardware
• documentation

why choose t-motor?

t-motor is the gold standard in brushless motor technology, trusted by professional pilots and builders worldwide. the mn5008 delivers exceptional efficiency, reliability, and performance for demanding applications.

note: recommended for experienced builders. requires compatible esc rated for motor specifications.

nome del marchio : noenname_null

Accessori per droni tipo : motore

Ciao, miei cari amici! Questo negozio vende accessori originali per droni. Acquistate pure senza esitazione. Per qualsiasi domanda, lasciate un messaggio e vi risponderò il prima possibile. Se non siete soddisfatti del prodotto, contattate il servizio clienti: faremo il possibile per aiutarvi e soddisfarvi. Il mio indirizzo email è k1286816@qq.com. Grazie!

Nome del marchio : suunnyfllb

Marca di droni compatibile : DJI

sostanza chimica altamente preoccupante : nessuna

Modello di drone compatibile : DJI T40

Dimensioni : per DJI T40

numero di modello : DJI T40

pacchetto : sì

100% originale DJI : sì

100% nuovo : no

modulo motore t40 t20p per accessori per droni DJI, ricambi per riparazioni agricole

Prodotto originale DJI al 100%.

Nota: proviene da un altro drone, è usato ma in buone condizioni, funziona bene

Nome del marchio : axisflying

sostanza chimica altamente preoccupante : nessuna

peso : 220 g

Accessori per droni tipo : motore

numero di modello : ay3115

pacchetto : sì

Marca di droni compatibile : DJI

Italiano: https://www.aliexpress.com/store/1103326425/pages/all-items.html?productgroupid=40000006464016&spm=a2g0o.store_pc_home.pcshophead_2007422015701.1_7&storeid=1103326425&sorttype=bestmatch_sort&shop_sorttype=bestmatch_sort

Nome del marchio : axisflying

sostanza chimica altamente preoccupante : nessuna

is electric: no battery

origin: mainland china

material: metal

recommend age: 14+y

use: vehicles & remote control toys

model number: az3115

rc parts & accs: motors

Nome del marchio : gsf

è elettrico : senza batteria

materiale : metallo

Età consigliata : 14+ anni

per tipo di veicolo : aeroplani

Utilizzo : veicoli e giocattoli telecomandati

Periferiche/dispositivi di controllo remoto : motore

quantità : 1 pezzo

parametri tecnici : kv1100

numero di modello : 3210

passo : viti