specifiche

Nome del marchio : Mayatech

sostanza chimica altamente preoccupante : nessuna

parametri tecnici : valore 2

attributi della trazione integrale : assemblaggio

dimensioni : 108 * 105 * 76 mm

Componenti e accessori per modellismo radiocomandato : unità di ricarica per batterie

Utilizzo : veicoli e giocattoli telecomandati

per tipo di veicolo : aeroplani

origine : Cina continentale

Componenti/accessori per l’aggiornamento : batteria al litio

Periferiche/dispositivi per il controllo remoto : unità di ricarica batterie

quantità : 1 pezzo

materiale : plastica

forniture di utensili : classe assemblata

numero di modello : d6 pro

precauzioni per l’uso di batterie/caricabatterie al litio

① Durante la ricarica, si prega di tenere il dispositivo lontano da materiali infiammabili e di effettuare la ricarica in un’area aperta e ben ventilata!

② impedire la ricarica a temperature elevate/basse;

③ Le batterie che hanno già subito una rottura durante la carica devono essere smaltite tempestivamente in modo ecologico e non possono essere riutilizzate;

④ Collegare i poli positivo e negativo può causare la disconnessione della batteria e il rischio di esplosione;

⑤ Qualsiasi danno alla batteria o lesione causata dalla mancata osservanza delle istruzioni sarà a carico dell’utente;

⑥ Non sovraccaricare né scaricare eccessivamente la batteria. I danni alla batteria causati da sovraccarico o scarica eccessiva dovuti all’intervento umano non possono essere sostituiti;

⑦ when using a balanced charger for charging, please make sure to connect it correctly according to the requirements. improper charging methods may cause damage to the battery and even lead to safety accidents, and the consequences will be borne by the user.

battery usage warning:

the operating voltage of lithium batteries should not be reduced below 3.6v/s, otherwise it will cause permanent damage or even scrap of the battery

① dual channel simultaneous output, capable of charging two batteries simultaneously without interfering with each other, independent output, capable of charging batteries of different voltages, capacities, and brands separately. simply put, it is the integration of two 325w chargers.

② the chinese menu is displayed on a large screen, and the charging status function settings are clear at a glance. it can be set in both chinese and english.

③ reserved usb upgrade interface, which can update the charger system at any time,

④ equipped with a 5v2a usb output interface, it can be connected to digital devices for fast charging.

⑤ supports wireless charging, allowing mobile phones to be charged as soon as they are released, making it convenient, simple, and fast.

⑥ use the mobile app to set up charging.

difference between d6/d6 pro:

d6

external power supply is required, which can be supplied by a power pack or a switch power supply. the input voltage range is 6.5-30v

d6 pro

built in 200w power supply

(note: it is not a built-in battery) the rest is the same as d6. it is also possible to connect an external switch power supply or battery pack to achieve greater working power.

specification

brand: hota

model no. d6 pro

input voltage:ac 100 ~ 240v / dc 6.5 ~ 30v

charge current 0.1~15a × 2

charge power：dc 325w × 2(650w)

ac 200w（support power distribution）

discharge power nternal discharge:15w × 2(balance port 10w）

external discharge:325w × 2(650w)

battery type: lihv/lipo/life/lilon/lixx: 1 ~ 6s

nizn/nicd/nimh : 1 ~ 16s

smart battery : 1~6s

lead acid(pb) : 2~24v

enelop : 1~16s

balance current ：max 1600ma × 2

discharge current 0.1~3a × 2

external discharge current 1~15a × 2

usb output: 5v / 2.1a

dimensions :108 × 105 × 76mm

net weight ：555g

instructions for charging two channels simultaneously, but not fully charged at the same time

the power of the two channels is automatically allocated. if you operate channel 1 first and then channel 2, then channel 2 will be satisfied first, which means that the power of channel 2 will be higher, and vice versa.

for example, if you set 15a charging for channel 1, the power of channel 1 may directly increase to around 170 180w. if you also set 15a for channel 2, the power of the power supply will automatically meet the requirements of channel 2 for your subsequent operation. as a result, the power of channel 1 will automatically decrease, and the current will also decrease accordingly.

the difference between d6 and d6pr0 chargers is that d6 is a single charger that requires a dc power supply to be used

d6pr0 is a built-in power supply that can be used for household electricity. in addition, d6pr0 also supports external power supply

both chargers support battery internal resistance detection function

d6 pro

built in 200w power supply, the rest is the same as d6, and can be connected to an external switch power supply or power pack to achieve greater working power

d6 charger

external power supply is required, which can be connected to a switch power supply or a power pack. the input voltage range is 6.5-30v

hota d6 pro (except for the color difference, the outer packaging and product size and weight of d6 pr0 are the same)

hota d6