Your Cart

Telaio esarotore Rctosky ZD850 PRO M8N/M9N/M10 in fibra di carbonio da 850 mm, ESC BLHELI 40A, controllo di volo PIXHAWK, radiotelemetria

531,00 € – 683,00 €

Colore

Clear

Pixhawk Pro

Pixhawk Pro supporta i firmware ufficiali più recenti di ArduPilot e PX4.

1. Il processore avanzato ad alte prestazioni ARM Cortex-M4 a 32 bit STM32F427VIT6 (con 2 MB di memoria flash) è in grado di eseguire il sistema operativo in tempo reale NutTX Chibos RTOS;

2. 14 uscite PWM/servo;

3. Interfaccia bus (uart, i2c, spi, can);

4. Se l’alimentazione di backup integrata e il controller di backup si guastano, il controller primario passa automaticamente al controller di backup, che rimane quindi al sicuro;

5. Prevedere modalità automatica e manuale;

6. Fornire alimentazione ridondante e funzionalità di failover;

7. Luci LED multicolore;

8. fornire un’interfaccia per cicalino multitono

9. Registrazione dei dati di volo su scheda micro SD;

specifiche:

interfaccia

1.5 UART compatibile ad alta tensione 1, 2 con controllo di flusso hardware

2. 2 lattine

3. Ingresso compatibile con ricevitore satellitare Spektrum DSM / DSM2 / DSM-X

4. Ingressi e uscite compatibili con SBus Futaba

Ingresso segnale 5 ppm

6. Ingresso RSSI (PWM o tensione)

7.i2c

8.spi

Ingresso 9.3.3 e 6.6 VADC

10. Interfaccia micro USB esterna

set alto:

zd850 pro full carbon fiber+ 6 pcs blheli 40a brushless esc+

3 coppie di eliche in fibra di carbonio 3k 1555 + 6 motori d4114 400kv +

Pixhawk Pro +PPM +I2C +LED RGB +pulsante di sicurezza e cicalino OLED +3 linee (4 pin GH1.25, 6 pin GH1.25, 2,54 pin)

pacchetto semplice:

zd850 pro full carbon fiber+ 6 pcs blheli 40a brushless esc+

3 coppie di eliche in fibra di carbonio 3k 1555 + 6 motori d4114 400kv +

Pixhawk Pro + GPS M8N/M9N/M10 + modulo di alimentazione 3DR + supporto GPS + ammortizzatore + pulsante di sicurezza e cicalino + 3 linee (4 PGH 1.25, 6 PGH 1.25, 2.54 pin)

Pacchetto standard:

zd850 pro full carbon fiber+ 6 pcs blheli 40a brushless esc+

3 coppie di eliche in fibra di carbonio 3k 1555 + 6 motori d4114 400kv +

Pixhawk Pro + PPM + I2C + GPS M8N/M9N/M10 + modulo di alimentazione 3DR + supporto GPS + ammortizzatore + pulsante di sicurezza e cicalino + 3 linee (4 pin GH1.25, 6 pin GH1.25, 2,54 pin)

ritmo elevato:

zd850 pro full carbon fiber+ 6 pcs blheli 40a brushless esc+

3 coppie di eliche in fibra di carbonio 3k 1555 + 6 motori d4114 400kv +

Pixhawk Pro + PPM + I2C + LED RGB + OLED + GPS M8N/M9N/M10 + modulo di alimentazione 3DR + supporto GPS + ammortizzatore +
ammortizzatore + pulsante di sicurezza e cicalino + 3 linee (4 PGH 1.25, 6 PGH 1.25, 2.54 pin)

433/915 MHz 100 mW:

zd850 pro full carbon fiber+ 6 pcs blheli 40a brushless esc+

3 coppie di eliche in fibra di carbonio 3k 1555 + 6 motori d4114 400kv +

Pixhawk Pro + GPS M8N/M9N/M10 + modulo di alimentazione 3DR + radio V5 433/915 MHz 100 mW + supporto GPS + ammortizzatore +
pulsante di sicurezza e cicalino + 3 linee (4 PGH 1.25, 6 PGH 1.25, 2.54 pin)

433/915 MHz 500 mW :

zd850 pro full carbon fiber+ 6 pcs blheli 40a brushless esc+

3 coppie di eliche in fibra di carbonio 3k 1555 + 6 motori d4114 400kv +

Pixhawk Pro + I2C + LED RGB + OLED + GPS M8N/M9N/M10 + modulo di alimentazione 3DR + radio V5 433/915 MHz 500 mW +
supporto GPS + ammortizzatore + pulsante di sicurezza e cicalino + 3 linee (4 PGH 1.25, 6 PGH 1.25, 2.54 pin)

433/915 MHz 1000 mW:

zd850 pro full carbon fiber+ 6 pcs blheli 40a brushless esc+

3 coppie di eliche in fibra di carbonio 3k 1555 + 6 motori d4114 400kv +

Pixhawk Pro + I2C + LED RGB + OLED + GPS M8N/M9N/M10 + modulo di alimentazione 3DR + radio V5 433/915 MHz 1000 mW +
supporto GPS + ammortizzatore + pulsante di sicurezza e cicalino + 3 linee (4 pin GH1.25, 6 pin GH1.25, 2,54 pin)

Telaio per drone zd850 pro*1 GPS m8n:

modulo GPS m9n

m9n è un modulo GPS comunemente utilizzato nei veicoli aerei senza pilota, con le seguenti caratteristiche e applicazioni:

high precision positioning: the m9n adopts advanced gnss technology, supports multiple satellite navigation systems, and can provide high-precision position positioning information. for unmanned aerial vehicles, it can achieve accurate positioning and navigation.

multi system support: the m9n supports multiple satellite navigation systems, including gps, glonass, galileo, beidou, etc. this allows drones to receive multiple satellite signals simultaneously, improving positioning accuracy and reliability.

quick positioning: m9n has fast cold start and hot start times, which can quickly obtain satellite signals and perform positioning, making it crucial for the rapid takeoff and task execution of unmanned aerial vehicles.

m9n can search for more satellites outdoors with higher accuracy, faster search speed, and better stability.(the specific number of star searches is determined by the environment at that time.)

m10 gps module with ist8310 compass

m10 gps for pixhawk2.4.8: used for pixhawk2.4.8

m10 gps for pixracer r15:used for pixracer r15

m10 gps for pixhawk 6c :used for pixhawk 6c

the m10 gps uses multi-constellation gnss powered by u-blox m10 series, a concurrent gnss receiver which can receive and track multiple gnss systems. owing to the multi-band rf front-end architecture all four major gnss constellations, gps,galileo, glonass and beidou can be received concurrently.

it also comes with the ist8310 compass.this module ships with a baud rate of 115200 5hz.

the high-gain 25 x 25 mm patch antenna provides excellent performance and the omnidirectional antenna radiation pattern increases flexibility for device installation. it features active circuitry for the ceramic patch antenna, rechargeable backup battery for warm starts.

firmware support for m10 gps:

px4 1.14, ardupilot 4.3, or newer is required

1555 3k carbon fiber poropeller*3paira

6pcs d4114 400kv motor

6pcs 40a bec

features:

– using multicopter special program, fast throttle response,surpasses all kinds of open source software;

– firmware was optimized specifically for disc motor, and it has a very good compatibility;

– highly intelligent, strong adaptive capacity, reserve the timing setting item (height/middle timing), easy to use;

– throttle signal line is twisted wire to reduce crosstalk within the transmission signal generated by the copper, so that more stable flight;

– supports refresh rates up to 621hz throttle signal, compatible with various flight controllers. (note: the throttle signal over 500hz are all non-standard throttle signal);

– using mosfet special driver ic, its performance and stability far surpass the driving circuit with discrete components built;

– ultra-low resistance mosfet, strong flow capacity.

oled module can display some message.

radio telemetry can be used for wireless communication between pixhawk and computer or mobile phone.

specifications

brand name: rctosky

for vehicle type: airplanes

four-wheel drive attributes: assemblage

hign-concerned chemical: none

is batteries included: no

is electric: no battery

is it battery/power supply: n

is it charger/adapter: n

material: carbon fiber

model number: pro m8n m9n m10

origin: mainland china

quantity: 1 pcs

rc parts & accs: radio systems

recommend age: 14+y

remote control peripherals/devices: remote controller

size: zd850

technical parameters: kv1100

tool supplies: assembled class

upgrade parts/accessories: frame

use: vehicles & remote control toys

wheelbase: bottom plate

Reviews

There are no reviews yet.

Be the first to review “Telaio esarotore Rctosky ZD850 PRO M8N/M9N/M10 in fibra di carbonio da 850 mm, ESC BLHELI 40A, controllo di volo PIXHAWK, radiotelemetria”